Basement Floor Coating in Wellington & Surrounding Palm Beach County
The problem we see
Wellington is our home base, so we know exactly what humidity, summer storms and sandy soil do to garage slabs and pool decks here. From Olympia and Versailles to the equestrian estates around Palm Beach Polo, we install epoxy and polyaspartic floors across the village every week.
How we approach it
Basements are rare in South Florida, but where they exist (older West Palm and Lake Worth Beach homes, some custom builds with finished lower levels), they need a coating system specifically built for moisture transmission from below. Standard garage epoxy will fail on a basement slab in months.
What to expect on the day
We use moisture-tolerant primers and vapor-barrier base coats specifically designed for below-grade installations. Topcoat options include flake epoxy, metallic, polished concrete and decorative quartz — whatever fits the room's use.
What sets us apart
Day one is moisture testing, full diamond grind and crack repair. Day two is the vapor-tolerant primer and base coat. Day three is the decorative finish and topcoat. We work clean and ventilate properly — no chemical fumes lingering in your living space.
Getting a quote
What we don't do is install a coating over a basement that has active water intrusion. If the slab is wet or you've had standing water, we'll tell you to address the source first (drainage, sump, exterior waterproofing) before we coat it. Honest is cheaper for both of us.
The bottom line
Quote process is the same as any of our work — photos plus square footage, real number back, scheduled in two weeks.
What's included
Every install comes with the same checklist. No surprises.
- Calcium chloride moisture testing per ASTM F1869
- Diamond grind to bare concrete
- Vapor-tolerant epoxy primer rated for elevated moisture
- Crack and joint repair with polyurea filler
- High-solids epoxy base coat
- Decorative finish (flake, metallic, quartz, or polished)
- Two coats of polyaspartic or urethane topcoat
- Anti-slip additive in topcoat (optional)
- Low-VOC chemistry safe for indoor air quality
- Walkthrough and written care instructions
How it works
Free quote
Send a few cell-phone photos of the slab plus the rough square footage and we'll send back a real number — what's included, what it costs, no pressure. Most quotes go out the same day.
Schedule & prep
We pick a day that works. The day of, we move what needs moving, mask off walls and trim, then diamond-grind the concrete down to a clean profile. Prep is 80% of the job.
Install
Primer, base coat, decorative media (if applicable), and a polyaspartic or epoxy topcoat. Depending on the system, the floor goes from bare concrete to finished in one to two days.
Cure & walkthrough
Walk-on traffic in 12–24 hours, full vehicle traffic in 48–72. We walk the floor with you before we leave and don't invoice until you've signed off.
Why this matters in Palm Beach County
South Florida humidity is brutal on concrete
South Florida humidity sits at 70%+ for nine months of the year, and Palm Beach County concrete almost never fully dries out. That moisture transmission is the single biggest reason builder-paint garage floors and discount epoxy kits peel within a year. We test for it on every job.
Why hot slabs need real chemistry
Hot summers also mean hot slabs. A garage floor in Wellington in August can hit 110°F. Standard epoxy chemistry softens at that temperature, which is why hot tires lift it right off. Polyaspartic and high-quality industrial epoxy don't have that problem.
Coastal salt and UV exposure
Coastal Palm Beach properties — Palm Beach, Manalapan, Highland Beach, Juno — also fight salt mist and intense UV. Standard epoxy yellows in months under direct sun. UV-stable polyaspartic topcoats are the only correct topcoat for anything that sees outdoor light.
Western Palm Beach realities
Western Palm Beach (Wellington, Loxahatchee, The Acreage, Westlake) deals with bigger slabs, heavier loads, equestrian wash bays and workshops. Industrial-grade systems with quartz broadcasts or aggressive flake handle the abuse where residential kits fail.
Local install timing that pays off
Wellington garages take a beating from high humidity and warm slabs that never fully dry out — perfect conditions for hot tire pickup and old paint failure. Pool decks fight chlorine, sunscreen and bare-foot traffic. Our coatings are spec'd for those exact South Florida realities, with proper diamond-grind prep that's the only thing keeping a coating bonded for the long haul.
Signs it's time to call us
If any of these sound familiar, you're overdue.
What affects the price
Every slab is different. These are the things we look at when we quote.
- Square footage of the slab
- Condition of the existing concrete (cracks, prior coatings, oil contamination)
- Substrate prep needed (diamond grind, shot blast, crack chasing, patching)
- System chosen (flake epoxy, metallic, polyaspartic, polished concrete, quartz)
- Number of coats and topcoat type (UV-stable polyaspartic adds cost but lasts longer)
- Color and decorative options (custom flake blends, metallic pigments, line striping)
- Access — gated communities, stairs, elevators, after-hours requirements
- Moisture mitigation if testing shows elevated vapor transmission
Related services
We service all of Palm Beach County
We install across every neighborhood in Wellington, including Olympia, Versailles, Palm Beach Polo, Binks Forest. Same crew, same prep, same standards across the whole city.
Ready for a free, no-pressure quote?
Tell us about the slab. We respond same day, often within an hour.