Driveway Coatings & Sealing in Delray Beach & Surrounding Palm Beach County
The problem we see
Delray Beach properties from the Atlantic Avenue district to the Lake Ida bungalows get coatings that match the city's design-forward feel. We do high-gloss metallic floors, polished concrete and commercial coatings across Delray every week.
How we approach it
Driveways take more sun and weather abuse than almost any other surface on your property. Standard epoxy fails outdoors within months — yellows, chalks, peels. We use UV-stable polyaspartic coating systems that are specifically built for outdoor use and direct sun.
What to expect on the day
Our driveway systems start with a full pressure wash and diamond grind, then a moisture-tolerant primer, then a colored polyaspartic base, then a UV-stable polyaspartic topcoat with anti-slip additive. The finished driveway resists oil drips, tire marks, fluids and UV — and you can clean it with a hose.
What sets us apart
We also offer simple penetrating sealers for driveways that don't need a full color coating, just protection against staining and weather. These are a great fit for newer driveways that are still in good shape but you want to lock that in.
Getting a quote
Color options are wide. Flake broadcasts, solid colors, custom blends. Most installs are one to two days depending on the square footage and complexity.
The bottom line
Quote process is the same as everything else we do — photos, square footage, real number same day.
What's included
Every install comes with the same checklist. No surprises.
- Pressure washing and degreasing
- Diamond grinding for full coating systems
- Crack and joint repair
- Moisture-tolerant primer
- UV-stable polyaspartic base coat
- Optional decorative flake or solid color
- UV-stable polyaspartic topcoat
- Anti-slip additive standard
- Penetrating sealer option for new driveways
- Written warranty against peeling and UV failure
How it works
Free quote
Send a few cell-phone photos of the slab plus the rough square footage and we'll send back a real number — what's included, what it costs, no pressure. Most quotes go out the same day.
Schedule & prep
We pick a day that works. The day of, we move what needs moving, mask off walls and trim, then diamond-grind the concrete down to a clean profile. Prep is 80% of the job.
Install
Primer, base coat, decorative media (if applicable), and a polyaspartic or epoxy topcoat. Depending on the system, the floor goes from bare concrete to finished in one to two days.
Cure & walkthrough
Walk-on traffic in 12–24 hours, full vehicle traffic in 48–72. We walk the floor with you before we leave and don't invoice until you've signed off.
Why this matters in Palm Beach County
South Florida humidity is brutal on concrete
South Florida humidity sits at 70%+ for nine months of the year, and Palm Beach County concrete almost never fully dries out. That moisture transmission is the single biggest reason builder-paint garage floors and discount epoxy kits peel within a year. We test for it on every job.
Why hot slabs need real chemistry
Hot summers also mean hot slabs. A garage floor in Wellington in August can hit 110°F. Standard epoxy chemistry softens at that temperature, which is why hot tires lift it right off. Polyaspartic and high-quality industrial epoxy don't have that problem.
Coastal salt and UV exposure
Coastal Palm Beach properties — Palm Beach, Manalapan, Highland Beach, Juno — also fight salt mist and intense UV. Standard epoxy yellows in months under direct sun. UV-stable polyaspartic topcoats are the only correct topcoat for anything that sees outdoor light.
Western Palm Beach realities
Western Palm Beach (Wellington, Loxahatchee, The Acreage, Westlake) deals with bigger slabs, heavier loads, equestrian wash bays and workshops. Industrial-grade systems with quartz broadcasts or aggressive flake handle the abuse where residential kits fail.
Local install timing that pays off
Delray's mix of old Florida bungalows and new construction means we see everything from 70-year-old slabs to fresh pours. Each one needs a different prep approach — moisture testing, crack chasing, profile matching — before the topcoat goes on.
Signs it's time to call us
If any of these sound familiar, you're overdue.
What affects the price
Every slab is different. These are the things we look at when we quote.
- Square footage of the slab
- Condition of the existing concrete (cracks, prior coatings, oil contamination)
- Substrate prep needed (diamond grind, shot blast, crack chasing, patching)
- System chosen (flake epoxy, metallic, polyaspartic, polished concrete, quartz)
- Number of coats and topcoat type (UV-stable polyaspartic adds cost but lasts longer)
- Color and decorative options (custom flake blends, metallic pigments, line striping)
- Access — gated communities, stairs, elevators, after-hours requirements
- Moisture mitigation if testing shows elevated vapor transmission
Related services
We service all of Palm Beach County
We install across every neighborhood in Delray Beach, including Atlantic Avenue, Lake Ida, Tropic Isle, Seagate. Same crew, same prep, same standards across the whole city.
Ready for a free, no-pressure quote?
Tell us about the slab. We respond same day, often within an hour.