Decorative Flake Floors in Boynton Beach & Surrounding Palm Beach County
The problem we see
Boynton Beach has a huge mix of single-family neighborhoods, 55+ communities and growing commercial corridors. We install everything from garage epoxy in Hunters Run to commercial polyaspartic floors along Congress Avenue.
How we approach it
Decorative flake (also called chip floors) is the most popular epoxy system we install — and for good reason. Colored vinyl flake is broadcast over a wet base coat, scraped flush the next day, and sealed under polyaspartic. The result is a textured, slip-resistant, infinitely customizable floor that hides dirt, scratches and tire marks.
What to expect on the day
We carry dozens of standard flake blends — earth tones, blues and grays, classic black-and-white, bright accent colors. Custom blends are also available; bring us a paint chip or fabric swatch and we'll get close.
What sets us apart
Flake size is your choice too. 1/4-inch is the standard residential look — bold and obvious, hides dirt well. 1/8-inch is more subtle, almost like a polished stone. 1-inch is dramatic, used for showroom and high-end residential floors.
Getting a quote
Standard install is two days. Day one is grind, prep, base coat and full flake broadcast. Day two is scrape, vacuum, two topcoat passes. Walk-on by the next morning.
The bottom line
Quote with photos and square footage, real number same day. Flake systems are usually our most cost-effective premium option.
What's included
Every install comes with the same checklist. No surprises.
- Diamond grind to clean concrete profile
- Crack repair and joint detailing
- Wall and trim masking
- 100% epoxy base coat in your color choice
- Full broadcast of decorative vinyl flake to refusal
- Custom flake blend or standard color matching
- Excess flake scrape and vacuum
- Two coats UV-stable polyaspartic topcoat
- Optional anti-slip aluminum oxide additive
- Walkthrough and care instructions
How it works
Free quote
Send a few cell-phone photos of the slab plus the rough square footage and we'll send back a real number — what's included, what it costs, no pressure. Most quotes go out the same day.
Schedule & prep
We pick a day that works. The day of, we move what needs moving, mask off walls and trim, then diamond-grind the concrete down to a clean profile. Prep is 80% of the job.
Install
Primer, base coat, decorative media (if applicable), and a polyaspartic or epoxy topcoat. Depending on the system, the floor goes from bare concrete to finished in one to two days.
Cure & walkthrough
Walk-on traffic in 12–24 hours, full vehicle traffic in 48–72. We walk the floor with you before we leave and don't invoice until you've signed off.
Why this matters in Palm Beach County
South Florida humidity is brutal on concrete
South Florida humidity sits at 70%+ for nine months of the year, and Palm Beach County concrete almost never fully dries out. That moisture transmission is the single biggest reason builder-paint garage floors and discount epoxy kits peel within a year. We test for it on every job.
Why hot slabs need real chemistry
Hot summers also mean hot slabs. A garage floor in Wellington in August can hit 110°F. Standard epoxy chemistry softens at that temperature, which is why hot tires lift it right off. Polyaspartic and high-quality industrial epoxy don't have that problem.
Coastal salt and UV exposure
Coastal Palm Beach properties — Palm Beach, Manalapan, Highland Beach, Juno — also fight salt mist and intense UV. Standard epoxy yellows in months under direct sun. UV-stable polyaspartic topcoats are the only correct topcoat for anything that sees outdoor light.
Western Palm Beach realities
Western Palm Beach (Wellington, Loxahatchee, The Acreage, Westlake) deals with bigger slabs, heavier loads, equestrian wash bays and workshops. Industrial-grade systems with quartz broadcasts or aggressive flake handle the abuse where residential kits fail.
Local install timing that pays off
A lot of Boynton's housing stock is 70s and 80s construction with original concrete slabs that have seen multiple coats of garage paint over the years. Diamond grinding back to bare concrete is the only correct prep, and it's the difference between a five-year floor and a fifteen-year floor.
Signs it's time to call us
If any of these sound familiar, you're overdue.
What affects the price
Every slab is different. These are the things we look at when we quote.
- Square footage of the slab
- Condition of the existing concrete (cracks, prior coatings, oil contamination)
- Substrate prep needed (diamond grind, shot blast, crack chasing, patching)
- System chosen (flake epoxy, metallic, polyaspartic, polished concrete, quartz)
- Number of coats and topcoat type (UV-stable polyaspartic adds cost but lasts longer)
- Color and decorative options (custom flake blends, metallic pigments, line striping)
- Access — gated communities, stairs, elevators, after-hours requirements
- Moisture mitigation if testing shows elevated vapor transmission
Related services
We service all of Palm Beach County
We install across every neighborhood in Boynton Beach, including Hunters Run, Quail Ridge, Indian Spring, Leisureville. Same crew, same prep, same standards across the whole city.
Ready for a free, no-pressure quote?
Tell us about the slab. We respond same day, often within an hour.