Warehouse Epoxy Floors in Atlantis & Surrounding Palm Beach County
The problem we see
Atlantis is a small, well-kept city right next to JFK Medical Center. Country club homes and quiet residential streets — we install epoxy garage floors and patios across the city.
How we approach it
Warehouse floors take real abuse — forklift traffic, dropped pallets, chemical spills, constant heavy loads. Residential epoxy will fail in months. We install industrial-grade systems specifically rated for warehouse and distribution use.
What to expect on the day
Standard system is a high-build epoxy or urethane base over shot-blasted concrete, with a quartz or aggressive flake broadcast for traction, sealed with two coats of industrial polyaspartic. The finished floor handles forklifts, pallet jacks, dropped tools and chemical spills without lifting.
What sets us apart
We also install line striping, OSHA-compliant safety markings, lane separation and hazard zones as part of the same install. Coordinated colors, cleanly applied, surveyed for accuracy.
Getting a quote
Install timeline is driven by your operational hours. We can work overnight, weekends or in zoned phases so you don't shut down. Polyaspartic cure cycles let you have forklift traffic back on the floor within 48 hours.
The bottom line
Free quote includes a site walk-through, a written scope, and recommendations on the system spec for your specific use case.
What's included
Every install comes with the same checklist. No surprises.
- On-site evaluation and use-case spec'ing
- Shot blasting or diamond grinding to CSP-3+ profile
- Crack and joint repair, control joint chasing
- Moisture testing per ASTM F1869
- High-build epoxy or urethane base coat
- Quartz or aggressive flake broadcast
- Industrial polyaspartic or urethane topcoat
- Line striping and OSHA safety markings
- Coordinated install around operational hours
- Written warranty and care/maintenance documentation
How it works
Free quote
Send a few cell-phone photos of the slab plus the rough square footage and we'll send back a real number — what's included, what it costs, no pressure. Most quotes go out the same day.
Schedule & prep
We pick a day that works. The day of, we move what needs moving, mask off walls and trim, then diamond-grind the concrete down to a clean profile. Prep is 80% of the job.
Install
Primer, base coat, decorative media (if applicable), and a polyaspartic or epoxy topcoat. Depending on the system, the floor goes from bare concrete to finished in one to two days.
Cure & walkthrough
Walk-on traffic in 12–24 hours, full vehicle traffic in 48–72. We walk the floor with you before we leave and don't invoice until you've signed off.
Why this matters in Palm Beach County
South Florida humidity is brutal on concrete
Commercial floors in Palm Beach County deal with the same humidity and slab moisture as residential, but with the added pressure of operating-hour constraints, OSHA compliance, food safety, chemical exposure and equipment loads. The wrong system fails fast and shuts your operation down.
Why hot slabs need real chemistry
We spec each commercial system around the actual use case — forklifts and pallet jacks need different chemistry than restaurant kitchens, which need different chemistry than veterinary clinics. We won't sell you a residential garage system for a commercial application, even if it's cheaper.
Coastal salt and UV exposure
Coastal Palm Beach commercial properties also fight salt and UV on any exterior or partially open floor (loading docks, drive-throughs, retail entries). UV-stable polyaspartic and high-build urethane topcoats are non-negotiable for those.
Western Palm Beach realities
We work around your hours. Most commercial installs are scheduled overnight or weekends to avoid disrupting operations. Polyaspartic systems cure fast enough that you can be back in business within 24 hours of pour.
Local install timing that pays off
Atlantis homes are typically well-maintained, and our coatings need to match that standard. Premium prep, premium finish.
Signs it's time to call us
If any of these sound familiar, you're overdue.
What affects the price
Every slab is different. These are the things we look at when we quote.
- Square footage of the slab
- Condition of the existing concrete (cracks, prior coatings, oil contamination)
- Substrate prep needed (diamond grind, shot blast, crack chasing, patching)
- System chosen (flake epoxy, metallic, polyaspartic, polished concrete, quartz)
- Number of coats and topcoat type (UV-stable polyaspartic adds cost but lasts longer)
- Color and decorative options (custom flake blends, metallic pigments, line striping)
- Access — gated communities, stairs, elevators, after-hours requirements
- Moisture mitigation if testing shows elevated vapor transmission
Related services
We service all of Palm Beach County
We install across every neighborhood in Atlantis, including Atlantis Country Club, Atlantis Estates. Same crew, same prep, same standards across the whole city.
Ready for a free, no-pressure quote?
Tell us about the slab. We respond same day, often within an hour.